Vet-o-test
VET506
Canis-Coronavirus
Only for export!
Principles
Vet-o-test Canine-Coronavirus is designed to detect the antigens of canine coronavirus in canine feces. Two monoclonal antibodies in the kit specifically bind with different epitopes of the antigens. After being absorbed into the cellulose pad, the antigens of canine coronavirus move and bind with gold-colloid complex of monoclonal anti-canine coronavirus of the conjugate pad, forming Ab-Ag complex. This complex, then, forms Ab-Ag-Ab direct sandwich binding with the antibody of another monoclonal anti-canine coronavirus in the nitrocellulose membrane. The test results can appear on Control and Test lines where the principles of immunochromatography are applied.
Characteristics
One-step rapid test of canine corona virus antigens
Rapid test results between 5 ~ 10 minutes
Expensive equipment not required
Easy storage and maintenance
High-purity and high-quality materials of the test kit increases its sensitivity and specificity.
Materials (10 tests/kit)
test 10 units
Diluent (buffer) 1㎖ x 10 units
Disposable dropper 10 units
Swabs for sample collection 10 units
Instruction for use 1 unit
Composition
Specimen well (S : for dropping), Test line (T), and Control line (C) are marked on the device. Inside it, the strip is composed of sample pad, conjugate pad, nitrocellulose membrane (test paper), and absorbent pad
Effect
Detection of canine corona virus antigens from canine feces
Uses
Specimen
Canine feces
Storage of specimen
a) Store specimen at 2~8℃ for use within 24 hours or at -25℃ for later use.
b) Keep the specimen at 22~25℃ before use.
Test procedure
a) Collect canine feces with a swab and put the swab into a sample tube containing 1㎖ of buffer.
Do not use sticky or a lump of feces.
b) Swirl the buffer with the swab.
c) Drop 100
㎕ (4 drops) into the specimen well(S).
d) Read the test results within 5~10 minutes.
Consider the test results as invalid after 10 minutes
Interpretation of the results
A purple band should appear on the control line regardless of the test result. The presence of another band on the test line determines the result.
Control Line (C): The line should always appear regardless of the presence of the antigens of canine parvovirus. If this line does not appear, the test should be considered invalid. This is probably because of impure buffer and the lack of specimen. It should be tested again with new buffer.
Test Line (T): The presence of antigens of canine parvovirus determines the test line.
1)
Negative: Control line only appears.
2) Positive: Both Test and Control lines appear.
3) Retesting
a) Both Test and Control lines do not appear.
b) Test line only appears. 
Further examinations
This test is for primary screening. Consult veterinarians for further necessary examinations to obtain clinical test results.
Precautions
Use for canine In-vitro diagnostic purposes only.
Use within 10 minutes after opening the pouch because the test kit is very sensitive to moisture and its effect may diminish.
Be careful of not touching the result window.
Every specimen should be used with different droppers.
For testing, buffer included only should be used.
Do not use specimen being contaminated with microbes, which may cause false-positive or negative result.
Deal with specimen carefully. They can deliver unknown virus or infectious bacteria.
Use disposable gloves when you suspect the infection caused by specimen. And wash your hands later.
Dispose solid wastes after sterilizing them at 121 ℃ for over 1 hour.
Do not the kit use when its pouch is torn, sealing is not good shape and expiration date passes.
Storage method
The test kits store at 2~30℃ can be used for 18 months after manufacturing. Do not keep them in refrigerator. However, if they are stored under cold circumstances, keep them at room temperature for 15 ~ 30 minutes before use.
Exchange
The test kits are manufactured under strict quality control system. Nevertheless, if they deteriorate during delivery, ask our distributors for exchange.
Liability
The entire risk due to the performance of this product is assumed by the purchaser. The manufacturer shall not be liable for indirect, special or consequential damages of any kind resulting from use of this product.
Only for research purposes.
